An immersive gameplay experience
Visuals are one of the most critical factors for an immersive gameplay experience. Without a decent monitor (or even a multiple-screen setup), you won’t experience that immersive feeling. It is possible to go one step further, one step to an ultimate immersive experience: our Ultimmersion Projection Screens.
Our patent-pending Ultimmersion//180 is a revolutionary curved 180-degree projection screen with a maximum of up to three meters (about 9.85 feet), allowing you to place your sim rig within the dimensions of your screen. Imagine how it feels when sitting within your simulation when you are overtaking someone during a race or doing a low-pass over an airfield. All without the limitation of VR: you can see your cockpit.
Compact, light-weight and easy to set-up
We’re not claiming that curved projection is an entirely new technology. Curved projection screens have been available for quite some time and are used in professional simulators. These projection screens are unfortunately not suitable for home use as they are large, heavy, and (very) expensive.
Until now; we’re bringing compact, lightweight, affordable curved projection screens to your home. Our Ultimmersion screens can be as small as two meters (6.56 feet) and weigh up to 30 kilograms. In other words: you can place our immersive screens in virtually any room, without having to worry about the structural limits of your floor (or if you can carry the screen to an upper floor).
Ultimmersion screens are – thanks to the ingenious design - also easy to set up. You can build up the screen within an hour without any technical knowledge.
Ultimmersion Projector Mount
The Ultimmersion Projector Mount can be placed on top of the two back supports of an Ultimmersion screen. Due to the universal design of the mount it is compatible with almost all large brand projectors.
As we’ve already pre-assembled most of this Projector Mount, placing it on top of your screen is as easy as setting up your screen, won’t take longer than 15 minutes and doesn’t require any technical skill.
Creating perfect visuals
Working with a curved projection screen and multiple projectors comes with challenges.
Visuals need to be geometrically corrected for the curved form of the screen and the overlapping projection needs to be blended so one large widescreen image is created. In plain English this means that the two overlapping images need to be adjusted, so they are displayed as one clear image.
Luckily the Immersive Display Pro software from Fly Elise NG provides an easy solution. With their software you can adjust the image manually or automatically* when following all steps in the configuration wizard. For the best visual results, we advise to complete the configuration manually, which takes some extra time and effort.
* only available when a camera/webcam is connected to your system
Developed using Optoma projectors
Our products have been developed using Optoma HD29HST projectors.
The HD29HST is a Full HD (1920 x 1080) short throw projector with a brightness of 4.000 lumens and a contrast ratio of 50.000:1. This means the projector can be used in a room that is not entirely darkened.
As this projector has a low input lag (8.6 ms) you won’t notice any delay between your controller input and on screen action.
Don't take our word for it
I'm using VR for racing, but racing on a
180 degree screen is actually more immersive than VR.
Feels like you are actually racing.
I've never seen this solution before. Crazy (immersive) experience.